Mindray Z60 - User Manual

Questions and Answers

C
Christopher NguyenAug 9, 2025
Why has the image quality of my Mindray Diagnostic Equipment degraded?
- M
  Michael RitterAug 10, 2025
  Degradation in image quality of your Mindray Diagnostic Equipment can occur due to several reasons. The exam mode might not be correct, so select an appropriate exam type. Also, the settings of the image post-processing might be incorrect; adjust these settings or reset the post-processing to the default values. Inappropriate image presets can also cause this issue; reset the factory default setups.
K
Kevin BlevinsAug 15, 2025
What to do if the Mindray Z60 Diagnostic Equipment monitor displays characters but no images?
- D
  Dorothy ValdezAug 15, 2025
  If your Mindray Diagnostic Equipment monitor displays characters but no images, the transmission power, overall gain, or TGC controls may be improperly set; adjust these settings. Also, make sure that a probe is properly connected. Finally, check if the system is in a frozen status and unfreeze the image.
D
Dana StephensAug 22, 2025
What to do if the button is responseless with the system buzzing on Mindray Diagnostic Equipment?
- B
  baxtermarkAug 22, 2025
  If a button on your Mindray Diagnostic Equipment is unresponsive and the system is buzzing, it's possible the button is blocked by dirt. Check the control panel for any blockage and press the button several times to try and release it. If that doesn't work, clean the button.
L
Larry WolfeAug 27, 2025
What to do if the Mindray Diagnostic Equipment monitor is on but the image is blank?
- B
  Brittany RiddleAug 27, 2025
  If the power indicator of your Mindray Diagnostic Equipment monitor is on but the image is blank, the interval between turning off and restarting might be too short; turn off the system and wait a minimum of 1 minute before restarting. The monitor brightness or contrast may also be improperly set; adjust the contrast.
J
Jose HuntSep 2, 2025
How to fix a Mindray Z60 Diagnostic Equipment power indicator that doesn't light on?
- S
  Sonya MoodySep 2, 2025
  If the power indicator on your Mindray Diagnostic Equipment doesn't light up after turning on the power supply, it could be due to an abnormal power system or an incorrect power cord connection. Verify that the plug has not become loosened or dislodged from the back of the system.

Summary

Safety Precautions

Safety Classification

Safety Precautions

Lists essential safety precautions for patient and operator during system use.

System Overview

Intended Use

Product Specifications

Control Panel

Explains the functions and descriptions of the control panel keys and buttons.

System Preparation

Power Supply

Details how to connect the system to external power or use battery power.

Powering ON; OFF

Explains the procedures for powering the system on and off correctly.

Connecting; Disconnecting a Probe

Guides on how to properly connect and disconnect ultrasound probes.

Connecting; Removing a USB Storage Device

Basic Screen and Operation

Exam Preparation

Start an Exam

Guides on initiating a new patient exam or continuing an existing one.

Patient Information

Details on entering and managing patient information screens.

Select Exam Mode and Probe

Instructions for selecting the appropriate exam mode and probe.

Selecting Imaging Mode

Activate& Continue an Exam

Pause & End an Exam

Guides on pausing and correctly ending a patient examination.

Image Optimization

Quickly Saving Image Setting (QSave)

B Mode

Details on B Mode exam protocol, parameters, and optimization.

M Mode

Procedures, parameters, and optimization for M Mode imaging.

Color Mode Image Optimization

Optimizing image parameters for Color Mode scanning.

Power Mode Image Optimization

Guides for optimizing images in Power Mode (DirPower).

PW;CW Doppler Mode

Procedures, parameters, and optimization for PW/CW Doppler modes.

Color M Mode

Anatomical M Mode (Free Xros M)

TDI

iScape

3 D;4 D

Elastography

Contrast Imaging

Basic procedures, parameters, and operations for Contrast Imaging.

Display & Cine Review

Image Display

Cine Review

Guides on entering, exiting, and performing cine review in various modes.

Image Compare

ECG

ECG Operation Basic Procedures

Step-by-step guide to connect and operate the ECG device.

Parameter Description

Measurement

Basic Operations

General Measurements

Details on 2D, M Mode, and Doppler general measurements.

Comments and Body Marks

Comments

Instructions for adding, modifying, moving, and deleting text comments and arrows.

Body Mark

Patient Data Management

Patient Information Management

Details on entering and managing patient information.

Image File Management

Covers storage media, file formats, and saving images to the system.

Report Management

Patient Data Management (iStation)

Explains searching, viewing, and managing patient data within iStation.

Access Control

Details on setting up user accounts, login, and access permissions.

DICOM

DICOM Preset

Guides on configuring network, DICOM, and DICOM services.

Verify Connectivity

DICOM Service

Details on DICOM storage, print, worklist, MPPS, commitment, and query/retrieve.

Setup

System Preset

Configuration of system parameters like region, general settings, and image presets.

Exam Preset

Print Preset

Network Preset

Maintenance

Guides on system maintenance, including options, probe checks, and other settings.

Probes and Biopsy

Probe

Biopsy Guide

Provides warnings and procedures for performing biopsy procedures.

Needle-guided Brackets

Details the types, parts, and installation of needle-guided brackets.

Biopsy Menu

Verify Biopsy Guide Line

Removing the Needle-guided Bracket

Clean and Sterilize the Needle-guided Bracket

Procedures for cleaning and sterilizing needle-guided brackets.

Battery

Precautions

Important precautions to follow when using and handling the battery.

Installing and Removing the Batteries

Acoustic Output

Prudent Use Statement

ALARA Principle (As Low As Reasonably Achievable)

Explains the ALARA principle for controlling ultrasound energy exposure.

MI;TI Explanation

Basic knowledge and display of Mechanical Index (MI) and Thermal Index (TI).

Acoustic Power Setting

Guides on adjusting acoustic power percentage and default settings.

Acoustic Power Control

Acoustic Output

System Maintenance

Daily Maintenance

Responsibilities and procedures for daily system cleaning.

Troubleshooting

Provides a table of common failures, causes, and measures for troubleshooting.

Electrical Safety Inspection

Power Cord Plug

Protective Earth Resistance

Earth Leakage Test

Procedure and limits for performing enclosure and patient leakage tests.

Enclosure Leakage Test

Patient Leakage Current

Measurement conditions and limits for patient leakage currents.

Mains on Applied Part Leakage

Patient Auxiliary Current

iWorks (Auto Workflow Protocol)

Overview

Normal iWorks Basic Procedure

Step-by-step guide for using the normal iWorks workflow.

View Operation

Mindray Z60 Specifications

General

Power Supply	100-240V AC, 50/60Hz
Applications	Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Musculoskeletal, Small Parts, Pediatrics, Urology
Storage	500GB hard disk
Ports	Ethernet, USB, VGA
Imaging Modes	B/M/Color/Power/PW/CW