Why is the image quality degraded on my Mindray Diagnostic Equipment?
If the image quality on your Mindray Diagnostic Equipment is degraded, first, ensure that you've selected the correct exam mode. If the issue persists, adjust the image post-processing settings or revert to the default values. As a last resort, try resetting the system to the factory default presets.
What to do if the Mindray DC-80 Diagnostic Equipment monitor is on, but the image is blank?
If your Mindray Diagnostic Equipment monitor is on but the screen remains blank, the issue might be due to restarting the system too quickly. Turn off the system, wait at least one minute, and then restart it. Also, check the monitor's brightness and contrast settings and restore them to their factory defaults if needed.
What to do if my Mindray Diagnostic Equipment monitor displays characters but no images?
If the monitor of your Mindray Diagnostic Equipment displays characters and menus but no images, try adjusting the transmission power, gain, or TGC control. Also, ensure the probe is correctly connected. Finally, check if the system is in a frozen state and unfreeze the image.
What to do if the button is responseless with the Mindray DC-80 Diagnostic Equipment buzzing?
If a button on your Mindray Diagnostic Equipment is unresponsive and the system buzzes, dirt might be blocking the button. Inspect the control panel for any obstructions and press the button repeatedly to try to dislodge any debris. If that doesn't work, clean the button thoroughly.
How to fix a Mindray DC-80 Diagnostic Equipment when the power indicator does not turn on?
If the power indicator on your Mindray Diagnostic Equipment doesn't light up after connecting the AC power, check if the system is properly plugged in. Ensure that the circuit breaker is in the Up position and verify that the plug is securely connected to the back of the system.
General| Imaging Modes | B, M, Color Doppler, Power Doppler, Pulsed Wave Doppler, Continuous Wave Doppler, Tissue Doppler, 3D/4D Imaging |
|---|---|
| Probes | Convex, Linear, Phased Array, Volume |
| Advanced Features | Auto Optimization, Auto EF |
| Connectivity | DICOM 3.0, USB, HDMI, VGA, Ethernet |
| Transducer Ports | 4 |
| Applications | Abdominal, Cardiac, Obstetrics/Gynecology, Vascular, Small Parts, Musculoskeletal, Urology, Pediatrics, Neonatal |
| Transducer Types | Convex, Linear, Phased Array, Volume |
| Power Supply | 100-240V AC, 50/60Hz |
| Operating Temperature | 10°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 30% to 80% |
To Next Page
