Mindray DC-80 - B Mode Image Optimization

5-4 Image Optimization
5.2 B Mode Image Optimization
B mode is the basic imaging mode that displays real-time images of anatomical tissues and organs.
5.2.1 Basic Procedures for B Mode Imaging
1. Enter the patient information; select an appropriate probe and exam mode.
2. Press <B> on the control panel to enter B mode.
3. Adjust the parameters to optimize the image.
4. Perform other operations (e.g. measurement and calculation) if necessary.
 Press <B> on the control panel to return to B mode in any time.
5.2.2 B Mode Parameters
In B mode scanning, the image parameter area in the upper right corner of the screen displays the
real-time parameter values as follows:
Parameter
F
D
G
FR
DR
iClear
iBeam
iTouch
Zoom
Echo
Boost
Meaning
Frequency
Depth
Gain
Frame
Rate
Dynamic
Range
Display when the function is turned on.