Why is the image quality degraded on my Mindray DC-85?
If the image quality on your Mindray Diagnostic Equipment is degraded, first, ensure that you've selected the correct exam mode. If the issue persists, adjust the image post-processing settings or revert to the default values. As a last resort, try resetting the system to the factory default presets.
What to do if the Mindray DC-85 Diagnostic Equipment monitor is on, but the image is blank?
If your Mindray Diagnostic Equipment monitor is on but the screen remains blank, the issue might be due to restarting the system too quickly. Turn off the system, wait at least one minute, and then restart it. Also, check the monitor's brightness and contrast settings and restore them to their factory defaults if needed.
What to do if my Mindray DC-85 monitor displays characters but no images?
If the monitor of your Mindray Diagnostic Equipment displays characters and menus but no images, try adjusting the transmission power, gain, or TGC control. Also, ensure the probe is correctly connected. Finally, check if the system is in a frozen state and unfreeze the image.
What to do if the button is responseless with the Mindray DC-85 buzzing?
If a button on your Mindray Diagnostic Equipment is unresponsive and the system buzzes, dirt might be blocking the button. Inspect the control panel for any obstructions and press the button repeatedly to try to dislodge any debris. If that doesn't work, clean the button thoroughly.
How to fix a Mindray DC-85 Diagnostic Equipment when the power indicator does not turn on?
If the power indicator on your Mindray Diagnostic Equipment doesn't light up after connecting the AC power, check if the system is properly plugged in. Ensure that the circuit breaker is in the Up position and verify that the plug is securely connected to the back of the system.
General| Brand | Mindray |
|---|---|
| Model | DC-85 |
| Category | Diagnostic Equipment |
| Language | English |
Provides essential safety precautions for patient and operator during system use.
Details the procedures for connecting the power cord and ensuring proper protective grounding.
Provides detailed instructions for connecting and disconnecting ultrasound probes safely.
Guides on entering and managing patient information for a new or existing exam.
Provides detailed guidance on optimizing images in B Mode, including basic procedures and parameters.
Guides on optimizing images in M Mode, including procedures and parameters.
Provides guidance on optimizing images in Color Mode, covering procedures and parameters.
Explains PW/CW Doppler modes, basic procedures, and image parameters.
Introduces 3D/4D imaging, including overview and key terms.
Covers Stress Echo features for capturing and reviewing cardiac loops for multi-phase protocols.
Covers the process of entering, exiting, and performing manual or auto cine review.
Details ECG operation, including connecting the device, setting parameters, and triggering.
Lists various general measurements performable on B, Color, Power, iScape, M, CM, AM modes.
Covers searching, viewing, backing up, sending, restoring, and deleting patient data.
Covers DICOM services like storage, print, worklist, query, and retrieve.
Provides guidance on biopsy procedures, including needle-guided brackets and their installation.
Explains the ALARA principle for controlling ultrasound energy levels to minimize risk.
Explains Mechanical Index (MI) and Thermal Index (TI) as indicators of ultrasound risk.
Details how to adjust acoustic power percentage for optimal image quality and safety.
Provides a table of common system failures, their causes, and recommended solutions.
To Next Page
