Mindray DC-85

12-10 Setup
12.9 Network Preset
12.9.1 Wireless Network Connection
You can set the ultrasound system as a hotspot. When other devices (with available wireless
network function) are connected to the system, DICOM, iStorage and network print function can be
implemented this way.
Turn on hosted network function:
1. Select [Wireless Network Connection] page in Network preset screen.
2. Confirm the Wi-Fi is enabled: you see [Disable Wifi] in the screen.
3. Enter the name and password for this hotspot in the Hosted Network box.
4. Click [Start] to enable the function.
5. Use other devices to search and connect to this network.
12.9.2 iStorage Preset
Name
Description
Service Name
The name of the iStorage service.
IP Address
IP address of the iStorage service device.
Port
Port for transmitting.
Connect
Click to verify connection.
Add
Click to add the Network service to the service list.
Update
To save the changed parameters.
Delete
Click to delete the selected service in the service list.
 Add a iStorage service
1. Set the iStorage server properties as described above.
2. Click [Add] to add the service to the Service list.