100
10-18. Accumulation clear
Accumulation clear is executed by SQ function SQF-98.
Clear the accumulation times and the accumulation value.
If the key is pressed when displays, becomes blinking.
At this time, please press the key to discontinue a clear memory.
It becomes a stand-by mode, and a clear memory is not executed.
When is a blinking display, the display section is turned off by pressing the key,
and it becomes display, the operation of memory clear is completed.
10-19. SQ function clear
SQ function clear is executed by SQ function F-99.
The setting content of the SQ function is returned to the default setting.
When the key is pressed with displayed, becomes a blinking
display.
At this time, please press the key to discontinue a clear memory.
It becomes a stand-by mode, and a clear memory is not executed.
When is a blinking display, the display section is turned off by pressing the key,
and it becomes display, the operation of memory clear is completed.
Please do not clear the SQ function under the measurement to cause an unexpected malfunction.
To Next Page
Loading...
