Minebea CSD-903-EX - Page 153

137
16-1-5. Scaling of analog output
The analog output is set as the minimum value ~ the maximum value by 0 to 10 000.
This can be made any value by changing CF-71 and CF-72.
CF-71 set the display when the minimum value is output.
CF-72 set the display when the maximum value is output.
・ The setting of CF-72 must not exceed the weighing capacity set in clause 4.
・ Please set the smaller value in CF-71 than the value set in CF-72.
最大表示
表示
最大表示の＋ 110 %
アナログ出力
約21.6 mA
約11 V
最大値 20 mA
10 V
最小値 4 mA
0V
0表示
約2.4 mA
約－1 V
ー1表示
A
nalog output
Display
The maximum display
+9D of the maximum display
Display
A
pprox.2.4 mA
A
pprox. –1 V
-20D display
the maximum display
The minimum displa
y
A
pprox.21.6 mA
A
pprox.11 V