16
(1) C function mode ( )
Various functions which relate to calibration by setting C function data become effective.
(2) Calibration mode ( )
By setting the calibration data, the calibration is executed to display the electric signal from the
measuring section (load cell) as an accurate load.
(3) Check mode ( )
The ROM version, the each input/output operation, the monitor of load cell output value, the BCD
output and the analog output can be confirmed by the check mode.
(4) Function mode ( )
Various functions become effective because of setting the function data.
(5) SQ function mode ( )
The setting of SQ function data makes various functions related to the sequence operation effective.
(6) Weighing comparative mode ( )
Execute the setting of comparison value of various weighing in the sequence weighing and
comparison operation.
(7) Accumulation display mode ( )
The accumulation value and accumulation times can be confirmed for each brand.
Pressing the key clears the accumulation value and accumulation times displayed.
To Next Page
Loading...
