20
4-3-4. Set weighing capacity
When key is pressed from display,
is displayed.
When the weighing capacity has already been changed, the
weighing capacity being memorized now is displayed.
Here, please set the weighing capacity.
: The value of changed digit is changed.
: Changed digit is selected.
: The value is changed to [0].
: Setting is interrupted and display returns to CCAL.
: The display value is memorized, and it proceed to the
next step.
After the setting, press the key.
4-3-5. Setting the mass of the weight
When key is pressed from display
is displayed.
[ ] is the amount of weighing capacity.
Please set the mass of the weight actually put on the measuring
section here.
The same setting as the weighing vcapacity is executed when
there is a weight for weighing capacity.
: The value of changed digit is changed.
: Changed digit is selected.
: The value is changed to [0].
: Setting is interrupted and display returns to CCAL.
: The display value is memorized, and it proceed to the
next step.
After the setting, press the key.
****
****
Memorized weighing
Changed weighing
Move to setting the mass
of the weight.
Move to the calibration
of zero point
ひょう量分の分銅値
Weight value put on
measurement section.
Mass amount equal to
wei
hin
ca
acit
Memorized weighing
ca
acit
Changed weighing
ca
acit
To Next Page
Loading...
