Minelab F3Ci - Default Chapter; Table of Contents

F3Ci Operations Manual
1
Table of Contents
1. Introduction ...................................................................3
2. General Description and Preparation .............................................5
2.1 Mine Detecting Set ...................................................................5
2.2 F3Ci Main Components ............................................................6
2.3 F3Ci Preparation ......................................................................8
3. Functional Description ..................................................................13
3.1 Functional Controls and Displays ........................................... 13
3.1.1 On/O f f Knob .................................................................13
3.1.2 Sensitivity Knob ............................................................ 14
3.1.3 Ground Balance ............................................................ 15
3.1.4 Noise Cancel Button ..................................................... 15
3.1.5 Mode Select Button ......................................................15
3.1.6 LED Display .................................................................. 16
3.1.7 Battery Status ............................................................... 17
3.1.8 Earset Socket ............................................................... 17
3.2 Functional Tones .................................................................... 19
3.3 Test Piece – Functional Test ...................................................20
4. Operating Procedures ....................................................................22
4.1 Introduction .............................................................................22
4.2 Standard Procedure ...............................................................23
4.2.1 STEP 1 Switch ON .......................................................23
4.2.2 STEP 2 Ground Balance ..............................................24
4.2.3 STEP 3 Test Piece ........................................................24
4.3 Optional Procedures ...............................................................25
4.3.1 Noise Cancel ................................................................25
4.3.2 Activate/Deactivate LEDs .............................................26
4.3.3 Activate/Deactivate Vibration ........................................27