4.7 Completion of Operations
At the completion of operations, the F3Ci should be checked with the
Test Piece before switching off to ensure satisfactory performance
before being packed away. Once completed:
a. Turn the detector off.
b. Clean the detector and inspect for any signs of damage.
c. Remove the batteries from the Battery Compartment and stow in
Soft Carry Bag.
d. Disconnect the Earset.
e. Retract the Middle and Lower Shafts rotating the coil to the
stowed position.
f. Collapse Handle and pivot the retracted shafts securing in
position with the Armrest Strap.
g. Stow the detector in the Soft Carry Bag and Hard Case if
available.
h. Check all components are accounted for (especially the Test
Piece and Earset) and are correctly packed.
To Next Page
Loading...
Need help?
General
