Minelab GP Extreme User Manual

THE MINELAB ‘GP extreme’
2
INTRODUCTION
1
www.minelab.com
ABOUT THIS MANUAL
This manual is designed to introduce the detector’s features. It gives you step-by-step
directions for everything from assembling and adjusting your detector, to basic and
advanced detector use.
1. INTRODUCTION
Basic overview of the ‘GP extreme’
and this User
’s Manual.
2. ASSEMBLY
This chapter provides details and
instructions on assembling and
adjusting the ‘GP extreme’
.
3. BATTERY
The ‘GP extreme’ is powered by a
rechargeable battery pack. This
chapter provides details on battery
installation, use and performance.
4. CONTROLS
This chapter is designed to
familiarize you with the various
features of the ‘GP extreme’ control
panel. A few minutes spent reading
this chapter will be a worthwhile
preliminary to basic or advanced
detecting.
5. DETECTOR OPERATION
However experienced you are at
using a metal detector, it is important
that you read this.
6. DETECTOR TECHNIQUES
Once you are comfortable with the
basic detector use, there are a few
techniques you should be aware of.
7. USER INFORMATION
This chapter provides a glossary of
terminology, user guides, technical
specifications, warranty and repair
details and troubleshooting tips.
ABOUT THIS MANUAL

THE MINELAB ‘GP extreme’
INTRODUCTION
1
3
Minelab ‘GP extreme’ is the first detector to use ‘Dual Voltage
Technology
’ (DVT).
Minelab have developed this new Dual Voltage Technology
(DVT) based on the Bi-Polar technology used in our military
detector range.
The New Features
The new features of the ‘GP extreme’ are
• new DVT technology giving greater depth than ever before
• selectable Tx (transmit) modes for different Soil conditions
• selectable Rx (receive) modes for increased sensitivity and
less susceptibility to interference
• adjustable Signal response for target tone variation
• volume limiting for users own preference
• and new ‘GP extreme’ 1100 and ‘GP extreme’ 1800 coils
which have been specially designed to take advantage of the
new DVT.
Minelab are confident that you will find the ‘GP extreme’ to be the
ultimate detector for finding metallic objects in highly mineralised
and/ or salty environments. Simple operation means that both the
beginner and professional will find this detector very easy to use.
Old gold fields, where mineralised ground and too much rubbish
have shielded many nuggets from the
‘prying eyes’ of other
detector operators, will likely yield new finds.
Minelab thanks you for purchasing this ‘GP extreme’
detector and wish you every success in your quest for gold
and treasure.
INTRODUCING THE MINELAB ‘GP extreme’
INTRODUCING THE MINELAB ‘GP EXTREME’
P0500-A

Minelab GP Extreme Specifications

General

Brand	Minelab
Model	GP Extreme
Category	Metal Detector
Language	English