Need help?Do you have a question about the Minelab gpz 7000 and is the answer not in the manual?
General| Ground Balance | Automatic and Manual |
|---|---|
| Technology | ZVT (Zero Voltage Transmission) |
| Wireless Audio | Yes |
| Display | LCD |
| Waterproof | No |
Explains the purpose of each button on the detector's control panel.
Explanation of the Global Positioning System and its use with the detector.
Details various map elements like zoom, trails, points of interest, and navigation.
Summaries of options available on Detect, Detect Plus, Settings, Preferences, User Button, and Reset pages.
Eliminates electromagnetic interference (EMI) via Auto or Manual modes.
Controls the detector's response to received signals.
Controls removal of ground noise in Difficult or Normal conditions.
Controls the amplification of the target's audio response.
Adjusts the background 'hum' to help hear faint targets.
Selects the method for balancing out unwanted ground noise.
Guides for performing the Quick-Trak function for ground balancing.
Configuration options for the Global Positioning System.
Steps to select and assign functions like Backlight, View Coordinates, etc.
Options to Reset GeoStore, Reset Settings, or Reset All.
Steps to open, zoom, sort, and go to saved locations.
Steps to create points, start/stop GeoHunts, and handle errors.
Proper holding, shaft adjustment, coil angle, and sweeping techniques.
To Next Page
