Minelab Quattro MP - Quattro Technical Specifications

1. INTRODUCING THE QUATTRO MP 3
1.1. Multi-frequency-Full Band Spectrum (FBS) Technology 4
1.2. Quattro Technical Specifications 5
2. ASSEMBLING YOUR DETECTOR 6
Step 1 - Connecting the Search Coil 6
Step 2 - Shaft Assembly 6
Step 3 - Connecting the Shaft Assembly 7
Step 4 - Armrest Assembly 7
3. SEARCH COILS 8
4. BATTERIES 9
4.1. Removal/Replacement of Battery Pack 9
4.3. Recharging NiMH Battery Pack 10
4.4. Battery Indicator 10
5. HEADPHONES 11
6. QUICK START 11
7. CONTROL PANEL 12
7.1. Power (On/Off) 12
7.2. Display Meter 12
7.3. Detect Modes 14
7.4. Menu/Select +/- 16
7.5. Accept/Reject 16
7.6. Pinpoint 16
table of contents
www.minelab.com
p1
1.2. Quattro MP Technical Specifications
www.minelab.com
p5
Length Unextended 43 inches (1100mm)
Length Extended 55 inches (1358mm)
Shipping Weight 3 lb 7 oz (1700g) excluding batteries
Coil 10.5 inch (264mm)
Audio Output Internal speaker or headphones
Headphone Input 1/4 inch (6.3mm) stereo jack
Transmission Full Band Spectrum. Simultaneous multiple
frequency transmission ranging from
1.5kHz –100kHz
Ground Rejection Ground compensation – advanced digital filtering
Discrimination Linear –10 to +40 discrimination options
Visual Display 64 x 128 pixel liquid crystal display (LCD)
Detect Modes 4 (Coin; Coin/Jewelry; Relic; All Metal)
Pinpoint Yes - Visual and audio
Personal Modes 4 programmable/save
Automatic Noise Cancel (Scanning) Yes
Trash Density Settings 2 (High/Low)
Target Depth Meter Yes (0-12 or more inches)
Battery Meter Yes (with audible low battery warning)
Batteries 1600 or 1800 mAh NiMH rechargeable
battery pack (Varies by country/region) or
12V Alkaline pack. (Cells not included).
Patents US 4890064, US 5537041, US 5506506
Optional Accessories Alkaline or NiMH battery pack
Mains charger
Car charger
Control Box Cover
Coil Cover
Carry Bag
8 inch (200mm) "Double D" waterproof Coil