Need help?Do you have a question about the Mingda Glitar 4 and is the answer not in the manual?
General| Layer Resolution | 0.05-0.3 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Nozzle Temperature | Up to 260°C |
| Nozzle Diameter | 0.4 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Frame Material | Aluminum |
| Print Technology | FDM (Fused Deposition Modeling) |
To Next Page
