Need help?Do you have a question about the Mingda Magician X2 and is the answer not in the manual?
General| Layer Resolution | 0.05-0.3 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, SD Card |
| Supported Filaments | PLA, ABS, PETG, TPU |
| Bed Leveling | Automatic |
| Frame Material | Aluminum |
| Print Technology | FDM (Fused Deposition Modeling) |
| Bed Temperature | up to 100°C |
| Nozzle Temperature | up to 260°C |
| Display | 3.5-inch Touch Screen |
| Power Supply | 360W |
Instructions on safely moving the 3D printer without causing damage.
Visual identification of printer components and their locations.
Adjusting X, Y, and Z axis values for printer movement.
Resetting axes to origin and unlocking motors.
Loading or unloading filament from the extruder.
Adjusting printing speed and filament flow rate.
Accessing and modifying various printer settings.
Adjusting the cooling system's fan speed.
Manually adjusting Z offset values for first layer calibration.
Troubleshooting guide for first layer adhesion problems.
Setting up Mingda Cura and basic slicing workflow.
Procedures for cleaning the printer parts from debris and dust.
Maintenance procedures for printer bearings.
Cleaning and checking printer fans for obstructions.
Cleaning the extruder feeding gear from filament residue.
Checking and reconnecting electronic connectors on the printer.
Diagnosing and fixing no-extrusion from the nozzle.
Troubleshooting partial or no filament extrusion from the nozzle.
To Next Page
