Need help?Do you have a question about the Mingda Magician Pro and is the answer not in the manual?
Guide to installing the printer's gantry structure.
Steps to power on the printer and initiate the auto-leveling process.
Steps to properly insert filament into the nozzle.
How to choose a G-code file from the SD card to start printing.
Guide to fine-tuning the Z-offset using the BabyStep feature for first layer adhesion.
Reviewing parameters, slicing the model, previewing, and saving the file to SD card.
General| Printing Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Layer Resolution | 0.05-0.3 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Connectivity | USB, SD Card |
| Display | 3.5-inch Touch Screen |
| Frame Material | Aluminum |
| Bed Temperature | Up to 110°C |
| Nozzle Temperature | Up to 260°C |
| Bed Leveling | Automatic |
| Power Supply | 24V |
| Max Print Speed | Up to 180 mm/s (Recommended 80-100mm/s) |
To Next Page
