Need help?Do you have a question about the Mingda Magician Pro and is the answer not in the manual?
General| Printing Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Layer Resolution | 0.05-0.3 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Connectivity | USB, SD Card |
| Display | 3.5-inch Touch Screen |
| Frame Material | Aluminum |
| Bed Temperature | Up to 110°C |
| Nozzle Temperature | Up to 260°C |
| Bed Leveling | Automatic |
| Power Supply | 24V |
| Max Print Speed | Up to 180 mm/s (Recommended 80-100mm/s) |
To Next Page
