Need help?Do you have a question about the Mingda MD Series and is the answer not in the manual?
General| Filament Diameter | 1.75 mm |
|---|---|
| Layer Resolution | 0.05-0.3 mm |
| Connectivity | USB, SD Card |
| Heated Bed | Yes |
| Nozzle Temperature | Up to 260°C |
| Power Supply | 24V |
| Technology | FDM (Fused Deposition Modeling) |
| Nozzle Diameter | 0.4 mm (Interchangeable) |
| Supported Materials | PLA, ABS, PETG, TPU |
Instructions for using the MD Industrial 3D Printer.
Essential safety guidelines for operating the 3D printer.
Adjusting the print bed level for optimal first layer adhesion.
Overview and functions of the printer's touch screen interface.
Sources for obtaining slicing software like Cura.
Step-by-step guide to installing slicing software.
Configuring Cura with specific printer model settings.
Detailed configuration options for slicing parameters.
Saving sliced models as GCODE files on an SD card.
Managing print jobs by pausing and resuming.
Routine checks and cleaning for optimal printer performance.
Information on how to get help and support.
To Next Page
