Need help?Do you have a question about the Mingda Magician X and is the answer not in the manual?
General| Build Volume | 230 x 230 x 260 mm |
|---|---|
| Layer Resolution | 0.05-0.3 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD card |
| Supported Materials | PLA, ABS, PETG, TPU |
| Frame Material | Aluminum |
| Display | 3.5-inch touchscreen |
| Print Technology | FDM |
| Heated Bed | Yes |
| Bed Temperature | Up to 100°C |
| Nozzle Temperature | Up to 260°C |
| Machine Weight | 10 kg |
| Leveling | Automatic |
| Power Supply | 24V |
To Next Page
