Need help?Do you have a question about the Mingda MD-6H and is the answer not in the manual?
Essential safety guidelines and warnings to ensure correct and safe operation of the 3D printer, preventing damage.
Initiates the process for loading filament, exemplified with PLA, detailing initial steps for extruder feed.
Adjusting the nozzle-to-platform gap for optimal first-layer adhesion, ensuring print success.
Procedure for printing test GCODE files to verify calibration and printer performance.
Comprehensive explanation of the printer's touch screen interface, including icons and their functions.
Information on acquiring essential slicing software such as Cura, RepetierHost, and Simplify 3D.
Step-by-step guide for installing the recommended slicing software, Cura, on your computer.
Introduction to the Cura software, covering its purpose and initial setup for the MD series printer.
Essential configuration settings within Cura for layer height, shell thickness, and general print quality.
Detailed configuration of advanced Cura parameters like nozzle size, speeds, retraction, and temperatures.
General| Layer Resolution | 0.05-0.3 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Materials | PLA, ABS, PETG, TPU |
| Connectivity | USB, SD card |
| Frame Material | Aluminum |
| Bed Leveling | Manual |
| Heated Bed | Yes |
| Bed Temperature | up to 100°C |
| Nozzle Temperature | up to 260°C |
| Machine Weight | 15 kg |
| Operating Voltage | 110V/220V |
| Display | 3.5-inch touchscreen |
To Next Page
