Need help?Do you have a question about the Mingda Magician X2 and is the answer not in the manual?
General| Layer Resolution | 0.05-0.3 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | USB, SD Card |
| Supported Filaments | PLA, ABS, PETG, TPU |
| Bed Leveling | Automatic |
| Frame Material | Aluminum |
| Print Technology | FDM (Fused Deposition Modeling) |
| Bed Temperature | up to 100°C |
| Nozzle Temperature | up to 260°C |
| Display | 3.5-inch Touch Screen |
| Power Supply | 360W |
To Next Page
