21
2) INTRODUCTION
This meter has high sensitivity of 9kΩ/V AC and 20kΩ/V DC and
can be used to measure voltage (AC/DC), current (DC), resistance,
decibel, diode test, transistor Iceo and hFE tests.
This meter presents the better accuracy when used in horizontal
position.
It is equipped with manual adjustment of zero and an exclusive track
for measurements of high currents up to 10A DC.
Actual conditions of use of a battery of 1.5V or 9V can be tested
because the multimeter incorporates loads suitable for each bat-
tery type.
3) ACCESSORIES
A. Supplied Accessories
After receive your instrument, check the presence of the following
items:
• Instructions Manual
• 1.5V Batteries
• Test Leads
To Next Page
Loading...
