34
9) WARRANTY
This instrument was carefully calibrated and inspected. If any failure
occurs under normal use, this product will be repaired according to
warranty conditions and limitations.
WARRANTY
SERIAL Nº MODEL ET-3021
1- The warranty period is 06 (six) months and begins on the date of
purchase.
2- It will be repaired free of charge in following cases:
A) Manufacturing defects or damages occurred under normal use of
instrument within the warranty period.
B) The services to correct the failure will be done only in authorized
service center or personal will be allowed to x this product.
C) If product is purchased through a Minipa’s authorized dealer.
3- Warranty will be void in case:
A) It has been misused, altered, neglected or damaged by accident or
abnormal conditions of operation or handling.
B) The instrument shows violations by a non authorized repair center.
4- This warranty does not apply to fuses, dry cells, batteries and acces-
sories as test leads, carrying case, thermocouple, etc.
5- For instrument with software, Minipa assumes responsibility that the
software will operate in accordance with its functional specications for
90 days. Minipa will not guarantee that the software will be error free
or operate without interruption.
6- Minipa assumes no risk for damage in transit or transportation costs.
7- Warranty will be valid only after the registration of this certicate.
Name:
Address: City:
State: Phone:
Sales Voucher N°: Date:
Serial N°:
Sales Agent Name:
To Next Page
Loading...
