6
• Avoid running your motor with the propeller outside of the water.
This may result in injuries from the rotating propeller.
• It is recommended to set the speed selector to zero and place the motor
in the deployed position prior to connecting power cables. Disconnect
power cables prior to stowing.
• Always ensure that the power cables are not twisted or kinked; and that
they are securely routed to avoid a safety or trip hazard. Ensure cables are
unobstructed in all locations to avoid damaging the wire insulation. Damage
to the insulation could result in failure or injury.
• Always inspect the insulation of the power cables prior to use to ensure
they are not damaged.
• Disregarding these safety precautions may result in an electrical short of
the battery(s) and/or motor. Always disconnect the motor from the
battery(s) before cleaning or checking the propeller.
• Avoid submerging the complete motor as water may enter the lower unit
through control head and shaft. Water in the lower unit may cause an
electrical short and damage the lower unit. This damage will not be covered
by warranty.
ATTENTION
To Next Page
Loading...
Need help?
General
