MINN KOTA MEGA LIVE - User Manual

1 | minnkotamotors.com
©2022 Johnson Outdoors Marine Electronics, Inc.
MEGA LIVE TARGETLOCK AND
MEGA 360 ULTREX ACCESSORY MOUNT
1854080, 1854081 & 1854082
TOOLS AND RESOURCES REQUIRED
22
1212
AA
1010
44
88
66
• 1/4” Allen Wrench
• Torque Wrench
• #2 Phillips Screwdriver
• Two #3 Phillips Screwdriver
• Drill
• 9/32” Drill Bit
• Pencil or similar marking tool
• 7/16” Box End Wrench
• A second person to help
with the installation
• 5/64 Allen Wrench
• Hack Saw
p Not shown on Parts Diagram.
✖ This part is included in an assembly and cannot be ordered individually.
Designed to provide improved lift assist for Ultrex motors equipped with both a Humminbird® MEGA 360 Imaging
TM
and MEGA Live
Imaging TargetLock
TM
.
MOUNTING CONSIDERATIONS
Item /
Assembly
Part # Description Notes Qty.
2
2991677 MNT ASM UTX 80/45”
Mount Assembly
for 1854080
1
2991674 MNT ASM UTX 80-112/52”
Mount Assembly
for 1854081
1
2991675 MNT ASM UTX 112/45”
Mount Assembly
for 1854082
1
A
Items 4-8
2994887
BAG ASM,FORTREX/ULTREX
MNT HDW
1
4 2263468
SCREW-1/4-20X2.5" S/S
PPH
6
6 2263103 NUT-1/4-20 NYLOCK SS 6
8 2261713 WASHER-1/4 FLAT 18-8 SS 6
10 2373434
SCREW-1/4-20 X 3/4 SS
PPMS
2
p
2297172
INSTALL GUIDE,M360/TL
MNT
1
12 2263806
STRAP-HLDDWN,33",
HOOK&LP
1
Mounting considerations for the installation of a new mount are very similar to the installation of a brand new motor. It is recommended
that the new mount be installed as close to the keel or centerline of the boat as possible. Make sure the area under the mounting location
is clear to drill holes and install nuts and washers. Minn Kota requires the use of all 6 mounting holes. Make sure the motor rest on the
mount is positioned far enough beyond the edge of the boat. The motor must not encounter any obstructions as it is lowered into the
water or raised into the boat when stowed and deployed. Consider a quick release or adapter bracket with the installation of your new
mount. To view a list of accessories, please visit
minnkotamotors.com.
The Ultrex Accessory Mount provides improved lift assist for Ultrex motors when installed with both Humminbird MEGA 360 Imaging
and MEGA Live Imaging TargetLock. When installing this Mount, complete the installation of the Humminbird accessories. Please
refer to Humminbird for instructions for the Humminbird accessory installed on the motor. If using this Mount without the use of the
Humminbird accessories, Minn Kota recommends using your original mount.

Summary

Mounting Considerations

Tools and Resources Required

Lists necessary tools and resources for installation.

Current Mount Removal

Disconnect the Gas Spring

Step-by-step guide to safely disconnect the gas spring.

Remove Motor From Mount

Instructions for detaching the motor assembly from the mount.

Remove Mount from the Boat Deck

Steps to detach the mount from the boat's deck.

Remove Mount from MKA-42;52;62 Bracket

Instructions for removing mount from MKA-42/52/62 brackets.

Remove Mount from MKA-23;RTA-19 Bracket

Steps to detach mount from MKA-23/RTA-19 brackets.

New Mount Installation

Assembly of Steering Module

Guide for assembling the steering module to the new mount.

Selecting a Mounting Location

Advice on choosing the optimal position for the new mount.

Install Ultrex Mount to Boat Deck

Detailed steps for mounting to the boat deck.

Install Ultrex Mount to MKA-42;52;62 Bracket

Instructions for attaching mount to MKA-42/52/62 brackets.

Install Ultrex Mount to MKA-23;RTA-19 Bracket

Steps for mounting to MKA-23/RTA-19 brackets.

Installing the Gas Spring

Guide for correctly installing the gas spring assembly.

Adjusting the Pull Grip and Cable

Procedure for adjusting the pull grip and cable length.

MINN KOTA MEGA LIVE Specifications

General

Brand	MINN KOTA
Model	MEGA LIVE
Category	Outboard Motor
Language	English