MINN KOTA RIPTIDE POWERDRIVE User Manual

32 | minnkotamotors.com
©2023 Johnson Outdoors Marine Electronics, Inc.
ADJUSTING THE LATCH COLLAR
a. With the motor in the stowed position, locate the
Latch Collar.
b. Using a #2 Phillips Screwdriver, loosen the screw
securing the Latch Collar in place.
Once the motor has been used, it may be necessary to adjust the Latch Collar up or down. The ideal adjustment is a slightly loose fit that
completely captures the Latch Collar in the Deploy Assist Lever when stowed.
Adjusting the Latch Collar
Latch Collar
Screw
1
c. Rotate the Latch Collar so it fits comfortably within
the hold of the Deploy Assist Lever.
d. Re-tighten the screw to secure the Latch Collar
in place.
Latch Collar
Screw
2

MINN KOTA RIPTIDE POWERDRIVE Specifications

General

Water Type	Saltwater
Speed Control	Variable
Digital Maximizer	Yes
i-Pilot Link	Optional
Speed Settings	Variable
Weight	Varies by model
Voltage	12V, 24V
Shaft Length	48", 54", 60"
Control Type	Foot Pedal, i-Pilot, or i-Pilot Link
Steering	Electric Steering
Mounting Location	Bow
Battery Requirement	12V or 24V Deep Cycle Marine Battery
Motor Type	Electric
Warranty	2 years
Thrust	55 lbs
i-Pilot	Available on select models