minnkotamotors.com | 17
©2019 Johnson Outdoors Marine Electronics, Inc.
DEPLOYING THE MOTOR WITH I-PILOT LINK
c. Use the Right Softkey to select the Stow menu.
Once selected the motor will automatically stow.
d. While the Motor is stowing, it is possible to stop the
action. Use either the Left Softkey to select the
Deploy menu or the Right Softkey to select the
Pause menu.
e. If the Motor continues, it will complete the Stow
process and the Prop will be disabled.
WARNING
As soon as the Stow menu is selected, the motor will
automatically stow. Be sure the motor is clear from
obstructions and has a clear path of travel. The Prop
is disabled while the motor is being stowed to prevent
accidental contact with the rotating propeller.
Deploying the Motor with i-Pilot Link
a. Press the Home button.
b. Scroll through the Content Area using either your
finger or the Screen Navigation button to find the
Ulterra button.
c. Select the Ulterra button using either your
finger or by pressing the Ok button to open the
Ulterra Menu.
NOTICE: The Ulterra button can only be found in
the Content Area with the Home Control Buttons
on i-Pilot Link systems on an Ulterra motor. Certain
Home Screen Buttons may be locked out while the
motor is stowed because those functions require the
motor to be deployed to operate.
2
2d 2e
1
1c
1c
i