minnkotamotors.com | 19
©2019 Johnson Outdoors Marine Electronics, Inc.
STOWING THE MOTOR WITH I-PILOT LINK
Stowing the Motor with i-Pilot Link
d. Once in the Ulterra Menu, find the Stow button
and select it.
NOTICE: The Stow button can only be found
when the motor is deployed.
e. The Ulterra motor will stow. While the Motor is
stowing, it is possible to pause the action. To pause
the action, find the Pause button and select it.
WARNING
As soon as the Stow button is selected, the motor
will automatically stow. Be sure the motor is clear from
obstructions and has a clear path of travel. The Prop
is disabled while the motor is being stowed to prevent
accidental contact with the rotating propeller.
a. Press the Home button.
b. Scroll through the Content Area using either your
finger or the Screen Navigation button to find the
Ulterra button.
c. Select the Ulterra button using either your
finger or by pressing the Ok button to open the
Ulterra Menu.
NOTICE: The Ulterra button can only be found
in the Content Area with the Home Control Buttons
on i-Pilot Link systems on an Ulterra motor. The motor
can only be stowed when it is currently deployed.
2
1
1c
1c
2d
2e
i
To Next Page
Loading...
Need help?
General
