Using the Utility Mode
7
Di152/Di183 7-11
7
Press the [Clear] key.
This clears the current setting.
8
Enter the new setting from the 10-
Key Pad.
E.g.: Enter “2” to change Copy
Priority to “Manual.”
?
Do you want to correct the
setting just entered?
➜
Press the [Clear] key and then
enter the new setting.
9
Press the [Start] key.
To further change the setting for another function, repeat steps 4
through 9.
10
Press the [Panel Reset] key to return to the default settings.
To Next Page
Loading...
