Minolta Di152 - Account Number; To Enter an Account Number

3
Before Making Copies
3-20 Di152/Di183
Account Number
If account numbers have been programmed, use of the copier can be
limited to certain people or to a specified number of copies for each
account.
✎
Note
If account numbers have been
programmed, the copier cannot be
used unless the specific account
number is entered first.
<Account number entry screen>
To use this function, set “Copy
Track” of “Administrator Mode”
under the Utility mode. (p.7-20)
To enter an account number
1
Enter the 3-digit account number
from the 10-Key Pad.
?
Do you want to correct the
access number just entered?
➜
Press the [Clear] key and then
enter the correct account
number.
2
Press the [Access] key.
3
The account number entry screen changes to the default setting
indication, indicating that the copier is ready to make copies. Run the
desired copy cycle.
4
When the copy cycle is completed, press the [Access] key a second
time.