Minolta Di152 - Highly Transparent Originals

4
Loading Originals
4-8 Di152/Di183
Highly Transparent Originals
When making a copy from OHP transparencies, translucent paper, or
other highly transparent original, position the original as detailed
below.
1
Raise the Automatic Document Feeder or Original Cover.
2
Place the original face down on the
Original Glass.
3
Position the original in the left rear
corner aligned with the marker on
the scale.
4
Place a blank sheet of paper of the
same size over the original.
5
Gently lower the Automatic Document Feeder or Original Cover.
6
Make the necessary settings.
❍
Making Copies (p.5-1)
❍
Advanced Copying (p.6-1)
7
Press the [Start] key to start the copy cycle.