Minolta Di152 - Page 121

Using the Utility Mode
7
Di152/Di183 7-25
Total Counter Clear for All Accounts Procedure (A-6)
1
Call the Administrator Mode to the Display.
❍
Calling the Administrator Mode to the Display (p.7-16)
2
Making sure that “Ad-” appears on
the Display, enter “1” from the 10-
Key Pad.
3
Press the [Start] key.
4
Making sure that “A--” appears on
the Display, enter “6” from the 10-
Key Pad.
5
Press the [Start] key.
6
Check that the Display shows “CLr.”
7
Press the [Start] key.
This clears the Total Counter values of all accounts, resetting them to
“0.”