7
Using the Utility Mode
7-32 Di152/Di183
Recalling a Job from Memory
1
Position the original.
❍
Original Loading (p.4-1)
2
Press the [Job Recall] key to show
the job number to be recalled on the
Display.
3
Check that the Display shows the
job number you want.
?
Do you know how to change the
contents of the Display?
➜
Each time the [Job Recall] key is
pressed, the Display alternates
between “Jb1” and “Jb2.”
4
Press the [Enter] key.
5
Press the [Start] key.
To Next Page
Loading...
