Before Making Copies
3
Di152/Di183 3-7
No. Part Name Description
1 Copy Tray Holds copies fed out face down from the copier.
2 Front Cover Open when replacing the Toner Bottle. (p.8-8)
3 1st Tray Holds up to 250 sheets of paper and easily adjusts to
different paper sizes.
Special paper can be used. (p.3-22)
4 Manual Bypass Tray Use for manual feeding of paper.
The paper is fed one sheet at a time.
Special paper can be used. (p.5-6)
5 Lock Release Cover Use to unlock the Side Cover.
6 Side Cover Open to clear a misfed sheet of paper.
7 Power Switch Use to turn the copier ON and OFF. (p.3-15)
8 Original Scales Use to align the original. (p.4-6)
9 Original Cover Holds the original against the Original Glass.
10 Original Glass Place your original on this glass to allow the copier to scan
it. The original is to be placed face down. (p.4-6)
11 Control Panel Use to start a copy cycle and make necessary settings.
(p.3-12)
To Next Page
Loading...
