Before Making Copies
3
Di152/Di183 3-13
7 Erase key • Press to select the erase position.
8 Finishing key • Press to select the finishing function.
9 File Margin key • Press to select the File Margin mode.
10 X/Y Zoom key • Press to make a copy with different zoom ratios set for
X (horizontal) and Y (vertical) directions.
11 Job Recall key • Press to recall either one of the two jobs previously
stored in memory.
12 Bypass Tray Size
Select key
• Press to select the size of the paper loaded in the
Bypass Tray.
13 Zoom ([ ][ ]) key • Press to change the zoom ratio in the range between
50% and 200% in 1% increments.
• What is shown on the Display changes from the number
of copies to be made to the zoom ratio.
14 Display • Shows the number of copies to be made, the zoom
ratio, and other setting data.
15 10-Key Pad • Use to type in the number of copies to be made and any
other numeric data.
16 Access key • Press when entering an account number.
• Becomes valid only when Copy Track has been set.
17 Energy Saver key • Press to set the copier into the Energy Saver mode.
18 Interrupt key • Press to interrupt a copy job.
19 Panel Reset key • Press to reset all copy functions and settings to their
defaults.
• Holding down the key for 3 seconds or more will set the
copier into the Utility mode.
20 Clear key • Press to reset the number of copies to “1.”
21 Stop key • Press to stop a print cycle.
• Press to stop a scanning sequence.
22 Start key • Press to start a scanning sequence.
• Press to start a print cycle.
• Press to validate the setting just made.
• The key lights up green when the copier is ready to
make copies, orange when it is not ready to make
copies.
23 Enter key • Press to validate the setting just made.
24 Zoom key • Press to select a zoom ratio from among those fixed
ratios available as standard.
25 Auto Paper/Auto Size
key
• Press to select either Auto Paper or Auto Size.
26 Paper key • Press to select the paper size
.
27 Auto/Photo key • Press to adjust the image density of the copy.
No. Part Name Description
To Next Page
Loading...
