137
Choose the recommended search for a suitable
driver. Click “Next.”
Choose to specify the location of the driver. The
browse window can be used to indicate the dri-
ver location. When the location is shown in the
window, click “Next.” The driver should be locat-
ed in the CD-ROM drive at :\Win98\USB.
MANUAL INSTALLATION
To install the Windows 98 driver manually, follow
the instruction in the connecting-the-camera-to-a-
computer section on page 133.
When the camera is plugged into the computer,
the operating system will detect the new device
and the add-new-hardware-wizard window will
open. Place the DiMAGE software CD-ROM in the
CD-ROM drive. Click “Next.”
To Next Page
Loading...
