32
Camera Malfunction
When the camera locks-up (‘freezes’), remove and reinsert the batteries or unplug and
replug in the AC adapter. Next, press the main switch to turn the camera on.
Turning the Camera On
Before turning the camera on, slide the mode switch to REC or PLAY.
Blinking Busy Lamp
Do not open the battery/card-chamber cover or unplug the AC adapter while the Busy lamp
is blinking.
Compact Flash Cards used with a Compact Flash Adapter
This information is for customers using compact flash cards in PCMCIA drives with a com-
pact flash card adapter.
The compact flash card will contain a folder titled EX15_01 (Fig. 1). Inside this folder are the
image files and a file titled Ftifold.inf (Fig 2).
DirectX Installation - Windows 98/Windows 95
DirectX is necessary to run Digita Desktop™ on a Windows based operating system.
Please install DirectX before installing Digita Desktop™. These instructions assume the CD-
ROM drive is drive D.
1. Insert the Dimâge EX CD-ROM into the CD-ROM drive.
2. Select Start ➔ Run. The Run dialog box will appear.
3. Type D:\DimageEX\Dx6core.exe in the Open text box, then click on OK.
4. Follow the directions that appear on the screen. Dx6core.exe will check for and
automatically install DirectX if necessary.
DirectX Installation - Windows NT
Check the Windows NT start-up screen to determine which Service Pack is installed on your PC.
Service Pack 3: DirectX is already installed.
Service Pack 1 or 2: Contact Microsoft for Service Pack 3 information.
IrDA COM Port - Windows 98/Windows 95
When the camera is connected to the com-
puter via the IrDA connection, COM4 should
be the Infrared Serial [COM] Connections
Port.
To check the COM port:
1. Select Start ➔ Settings ➔ Control Panel.
2. Click on the Infrared icon, then click on
the Options tag.
3. Check that COM4 appears in the
“Providing application support...” line.
If COM4 does not appear, refer to Windows
Help or your computer user’s manual for
instructions on how to change the Infrared
Serial Connections Port.
Fig. 1 Fig. 2
The Ftifold.inf file contains the image management information for the compact flash card.
This file is only updated when images are added or deleted via the Dimâge EX camera.
When images are added to or deleted from the card directly through the disk drive, the file is
not updated - this can cause unstable operation.
Delete images from or upload images to the compact flash card in the Dimâge EX via
the Digita Desktop™ software, or use the delete function on the Dimâge EX to remove
images from the compact flash card.
SOFTWARE INFORMATION FOR WINDOWSCAMERA INSTRUCTION INFORMATION - CONT’D
To Next Page
Loading...
