FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-17
<Procedure>
1. Press the Meter Count key. Then, press the following keys in this order.
2. From the 10-Keys, press the number corresponding to the service mode no. assigned.
3. Perform the necessary steps for the function selected.
<Leaving the Service Mode>
•
Press the Panel Reset key twice to go back to the Basic screen.
5-2. Entering the Service Mode
Press the
Stop key.
➡
Press “0.”
➡
Press “0.”
➡
Press the
Stop key.
➡
Press “0.”
➡
Press “1.”
Paper Size Input
Parts/Supplies Life Counter
Malfunction Counter
Misfeed Counter
PM Counter and Ports/Options Counter
~
Service Mode No. 4
✽
For 23 cpm Copier only
Service Mode No. 5
Service Mode No. 6
Service Mode No. 7
Service Mode No. 8
Service Mode No. 9
Service Mode No. 0
Service
Mode
Paper Size Counter
Display
To Next Page
Loading...
