FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-27
(15/18 cpm copier)
Remark
Whenever the Scanner Drive Cable has been rewound, be sure to make the “Adjustment of
the Scanner/Mirrors Carriage Position.” See p. D-69.
1149D044AA
8. Fit the ADF fixing bracket (one screw).
9. Mount M2 (two screws).
Pulley B
Pulley A
Scanner Drive Gear
Pulley C
1139D133AA
1. Fit the Pulley to the Scanner Drive Gear using two
screws.
1139D134AA
2. Wind the shorter length of the Cable 2 turns clock-
wise around the Pulley, working from the back to
front side.
1139D135AA
To Next Page
Loading...
