FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-42
7. Remove the rear lamp harness and harness clamp
(six).
8. Remove the mounting bracket (one screw).
1151D013AA
9. Remove the Fusing Thermoswitch (two screws).
1151D014AA
10. Slide out the Fusing Heater Lamp.
1139D196AA
11. Remove two C-clips.
12. Remove one spur gear.
13. Remove two bushings.
14. Remove the Upper Fusing Roller.
1139D197AA
To Next Page
Loading...
