Minolta EP2030 - DRIVE SYSTEM

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-15
[User Mode]
Function No.
Setting (The default is .)
U-23
✽✽
For 18/23 cpm
Copier only
<Auto Clear for Plug-In Counter>
Select whether to activate the auto clear (panel reset) function when
the Plug-In Counter is pulled out.
U-24
✽✽
For 18/23 cpm
Copier only
<Sort/Non-Sort Switching ON/OFF>
Select whether to enable or disable the function that automatically
switches between the Sort and Non-Sort mode depending on the
number of originals loaded in the ADF when the copier is equipped
with an ADF and finishing option.
U-28 <Auto Power OFF Timing>
Select whether or not to enable the auto power OFF function that
turns power off automatically after the lapse of a given period of time
after a copy cycle has been completed or a key on the control panel
has been operated.
✽
30: 15/18 cpm Copier 60: 23 cpm Copier
NOTES
1. Except for 0 and 99, the setting data equals the time in minutes.
2. “0” cannot be selected for this function if U-7 (Auto Power OFF
Disabling) available as one of the User Mode functions is set to
“0.”
U-51 to 54
✽
For 23 cpm
Copier only
<Special Paper Setting>
Designates each drawer of the copier for special paper.
U-51: 1st Drawer
U-52: 2nd Drawer
U-53: 3rd Drawer
U-54: 4th Drawer
NOTE
The APS mode is disabled if “1” is set.
Highlighted
Data 0
Description Auto clear is not activated. Auto clear is activated.
1
Data 0
Description OFF (disabled) ON (enabled)
1
Data Description Data Description
0
1
2
.
.
✽
Disabled
Enabled: 1 min.
Enabled: 2 min.
.
.
Enabled: 30 min.
✽
.
.
97
98
99
Enabled: 60 min.
.
.
Enabled: 97 min.
Enabled: 98 min.
Enabled: 240 min.
30
60
Data 1
Description Plain paper Special paper
0