Minolta MN40WP - Formatting the Memory Card

8VLQJ<RXU&DPHUD

5. To set the current date and time use the UP or DOWN buttons to select
Date Setup, and press the OK button to enter date setup menu.
6. Use the UP or DOWN buttons to change the highlighted field.
7. Use the LEFT or RIGHT buttons to change the selected field.
8. Press the OK button to save the entered date and time and to exit the
menu.
3.1.15 Silent Mode
This function allows you to turn off the sounds of the camera.
1. In Photo Mode press the SETTINGS button.
2. Select ‘Silent Mode’ using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (On, Off).
4. Press the MODE button to exit the settings menu.
3.1.16 Auto Power Off
This function sets the duration of time in which the camcorder will wait with
no user input before automatically powering off.
1. In Photo Mode press the SETTINGS button.
2. Select ‘Auto Power Off’ using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (1 Minute, 3 Minutes, 5 Minutes,
Off).
4. Press the MODE button to exit the settings menu.
3.1.17 Frequency
This function sets the frequency of the camera from 50Hz to 60Hz. Please
check the frequency of your location and set accordingly.
1. In Photo Mode press the SETTINGS button.
2. Select ‘Frequency’ using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (50 Hz, 60 Hz) the default
frequency for the United States is 60Hz.
4. Press the MODE button to exit the settings menu.
3.1.18 Format Memory Card
The format setting erases all photos, videos and data stored on your
memory card.
1. In Photo Mode press the SETTINGS button.
2. Select ‘Format Memory Card’ using the LEFT or RIGHT buttons.
3. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (Yes, No).