28
POWER buttons to confirm your selected exposure mode (-3, -2, -1, 0, +1,
+2, +3).
4.
Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
3.3.5 Metering
Metering mode refers to the way in which a camcorder determines the
appropriate exposure (quantity of light reaching the camcorder lens). Spot
metering will only base the exposure setting on a very small area of the
scene. Center metering will use the light from the center of the LCD and the
Multi setting measures the light at several points on the screen.
1.
In Loop Recording Mode press the MENU button.
2.
Select Metering using the ZOOM, UP or DOWN buttons and press
the OK or POWER buttons to enter the Metering submenu.
3.
Push the ZOOM, UP or DOWN buttons to navigate the menu and press
the OK or POWER buttons to confirm your selected exposure mode
(Average, Center, Spot, Matrix).
4.
Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
3.3.6 Sharpness
This function adjusts the visible detail of a video.
1. In Loop Recording Mode press the MENU button.
2. Select Sharpness using the ZOOM, UP or DOWN buttons and press the
OK or POWER buttons to enter the Sharpness submenu.
3. Push the ZOOM, UP or DOWN to navigate the menu and press the OK or
POWER to confirm your selected setting (Hard, Normal, Soft).
4. Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
3.3.7 Video Quality
The Video Quality function determines the level of compression the
camcorder uses when saving videos to the memory card.
1. In Loop Recording Mode press the MENU button.
To Next Page
Loading...
