52
3.9 Playback Mode
Videos and photos captured on your camcorder can be easily played back.
Power the camcorder on and press the MODE button to enter the mode
selection screen. Then press the LEFT or RIGHT buttons to select Playback
mode and press the OK or POWER buttons to enter Playback mode. You can
also press the Playback icon in the bottom left corner of the touch screen to
switch to Playback mode.
1.
Press the LEFT or RIGHT buttons to cycle through the captured videos
and images stored on the memory card.
2.
While viewing a recorded video, press the OK button to start playing a
recorded video, press the OK button again to pause the video.
3.
While a video is playing, press and hold the RIGHT or ZOOM IN buttons to
fast forward and press and hold the LEFT or ZOOM OUT buttons to
rewind.
In Playback Mode the following option are available:
3.9.1 Delete
This function is used to delete videos. Videos can be deleted singly or all at
once. Deleted videos and images are permanently deleted and cannot be
recovered.
1.
In Playback Mode press the MENU button to access the Delete
submenu.
2.
Use the LEFT or RIGHT buttons to navigate the menu and press the
OK or POWER buttons to confirm your selected setting (Confirm,
Cancel).
3.
Press the MODE button to exit the menu without deleting any videos or
images.
NOTE: Deleted media cannot be recovered.
Trash
right corner of the touch screen to access the Delete
menu.
To Next Page
Loading...
