55
5. Press the MENU button to exit the settings screen.
3.10.7 Brightness
screen.
1. In All Modes press the MENU button.
2. Then press the MODE button until the gear icon is highlighted.
3. Select Brightness using the ZOOM, UP or DOWN buttons and press the
OK or POWER buttons to enter the Brightness submenu.
4. Push the ZOOM, UP or DOWN to navigate the menu and press the OK or
POWER buttons to confirm your selected setting (High, Medium, Low).
5. Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
3.10.8 Auto Screen Saver
This function sets the duration of time in which the camcorder will wait with
no user input before automatically turning off the LCD screen. Note: even
while the screen is off, the camcorder will still be powered on.
1. In All Modes press the MENU button.
2. Then press the MODE button until the gear icon is highlighted.
3. Select Auto Screen Saver using the ZOOM, UP or DOWN buttons and
press the OK or POWER buttons to enter the Auto Screen Saver
submenu.
4. Push the ZOOM, UP or DOWN to navigate the menu and press the OK or
POWER buttons to confirm your selected setting (Off, 30 Seconds, 1
Minute, 2 Minutes).
5. Press the MODE button to exit the submenu or press the MENU button to
exit the settings screen.
3.10.9 Auto Power Off
This function sets the duration of time in which the camcorder will wait with no
user input before automatically powering off.
1. In All Modes press the MENU button.
2. Then press the MODE button until the gear icon is highlighted.
3. Select Auto Power Off using the ZOOM, UP or DOWN buttons and press
To Next Page
Loading...
