Operations in Utility mode
5-49
Operation
Chapter 5
Select [Connect] to set the connected
device for the current and subsequent
operations.
Select [PC] or [Printer] to connect the
scanner to a personal computer or
printer respectively.
Select [Previous] to return to the
previous screen.
Select [OK] to define the device to
which the Scanner is connected.
Select [Reset] to reset all customized
initial settings to the default factory
settings. What can be reset here are
the setting value in the utility mode
and the registered program contents.
Select [Previous] to return to the
previous screen.
Select [OK] to define the default
factory settings for the current and
subsequent operation.
Prin
ter
Prev
ious
Save Default Ext.Device
OK
PC
3
-2
Prev
ious
Reset Default.OK ?
OK
3
-3
To Next Page
Loading...
