Minolta PS7000 - Adjusting Exposure for Scanning; Auto

5-36
Operation
Chapter 5
Adjusting exposure for scanning
Select [Expo] (exposure) from the main
menu to set the exposure for scanning.
Auto
The appropriate exposure is automatically selected according to the type of original.
Select [Auto]. The menu name is
highlighted and the function is activated.
When [Auto] is selected, “A” (Auto) is
displayed in the center of the exposure
level bar.
Select [OK] to return to the main menu.
NOTE
[Auto] cannot be selected in Photo mode.
The exposure can be further adjusted after
[Auto] is set. Press the [Lite] or [Dark] key
for fine adjustment.
Select [OK] to return to the main menu.
Edit Expo Reso QltySize
A
600 2 A4
Start Appli./Driver
Lite Auto Dark OK
A
Set Exposure
Lite
Set Exposure
Auto Dark OK
A