5-38
Operation
Chapter 5
Selecting resolution
Select [Reso] from the main menu to set
the resolution of the image output.
Select [200 dpi], [300 dpi], [400 dpi], or
[600 dpi]. The specified resolution is
highlighted.
Select [OK] to return to the main menu.
NOTE
[600 dpi] cannot be selected when the following scan size.
landscape:A2, B3 or 17x23, 14x22, 14x17
portrait: A3, B4 or 14x17, 11x17, 11x14, LGL
The output resolution of 240dpi can be
additionally set.
For this setting, consult with your local
authorized dealer.
When 240dpi is set to be available, the
[200] key is switched to the [200/240] key.
The output resolution is switched between
200dpi and 240dpi whenever the [200/240]
key is pressed.
Edit Expo Reso QltySize
A
600
2
A4
Start Appli./Driver
200
dpi
300
dpi
400
dpi
600
dpi
OK
Set Resolution
200
240
300
dpi
400
dpi
600
dpi
OK
Set Resolution 240 dpi
To Next Page
Loading...
