Operations in Utility mode
5-53
Operation
Chapter 5
Select [Buzzer] to set when the
buzzer goes off.
Selecting [Alarm] makes the buzzer
go off only when any warning
message appears.
Selecting [Stop] makes the buzzer go
off when any prohibited operation is
attempted, as well as when any
warning message appears.
Selecting [Key in] makes the buzzer
goes off when any key is pressed and
accepted in addition to the above two
cases.
Select [No] to deactivate the buzzer.
Select [OK] to define the setting.
Alar
m
No
Enable Buzzer Settings
OK
Stop Key
in
3
-2
To Next Page
Loading...
